CAD And CAM Laboratory deals with the semester VI subject of Anna University B.E Production Engineering syllabus. In this article, we try to provide the unit-wise syllabus for academic purposes in one place.
We started to analyze the situation of students who are often confused about the syllabus. What are the topics do they include in the syllabus? In this article, you can simply find the detailed syllabus of the semester VI PR3612 – CAD And CAM Laboratory. I hope this information is useful. We also provide the required books and references regarding the subject especially.
If you want to know more about the syllabus of B.E. Production Engineering and Management connected to an affiliated institution’s four-year undergraduate degree program. We provide you with a detailed Year-wise, semester-wise, and Subject-wise syllabus in the following link B.E. Production Engineering and Management Syllabus Regulation 2021 Anna University.
Aim Of Concept:
- To gain practical experience in handling 2D drafting and 3D modeling software systems.
- Preparing standard drawing layout for modeled parts or assemblies with BOM.
- To train the students to write CNC Programming to simulate tool path simulation for different components.
PR3612 – CAD And CAM Laboratory Syllabus
CAD Lab
List Of Experiments:
2D Drafting
- Drawing, Editing, Dimensioning, Layering, Hatching, Block, Array, Detailing, Detailed
- drawing, basic principles of geometric dimensioning& tolerancing.
- Bush bearing
- Plummer block
- Safety valve
- Non-return valve
(Any 2 exercises shall be given)
3D Geometric Modeling And Assembly
- Sketcher – Datum planes – Protrusion – Holes – Part modeling – Extrusion – Revolve –Sweep–
- Loft–Blend–Fillet-Pattern–Chamfer-Round-Mirror–Section–Assembly- Drafting
- Flange coupling
- Universal coupling
- Knuckle joint
- Connecting rod
- Stuffing box
- Screw jack
(Any 4 exercises shall be given)
CAM Lab
List Of Experiments:
- Study of different control systems and NC codes.
- Program for Turning, Facing operation.
- Program for circular interpolation, Taper turning operation
- Program for thread cutting operation
- Program using Do-Loop and Sub-routine.
- Program for profile milling operation, circular interpolation
- Program for Circular, rectangular pocket milling
- Program for drilling cycle and Machining
- Program for tool compensation and Program offset and Machining
- Programming of CNC wire EDM
(Any 6 exercises shall be given)
Related Posts On Semester – VI:
Must Read For More: