Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements

Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements are part of Plus Two Chemistry Chapter Wise Questions and Answers. Here we have given Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements.

Kerala Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements

Plus Two Chemistry The d and f Block Elements One Mark Questions and Answers

Question 1.
The element of the 3d series which is not regarded as a transition element is ____________ .
Answer:
Zinc

Question 2.
Say TRUE or FALSE:
Cr²⁺ compounds are strong oxidising agents
Answer:
False

Question 3.
Which of the following has the least magnetic moment?
(a) Cu²⁺
(b) Ni²⁺
(c) Co²⁺
(d) Fe²⁺
Answer:
(a) Cu²⁺

Question 4.
The oxidation state of Cr in K₂Cr₂O₇ is _________
Answer:
+ 6

Question 5.
Lanthanoid contraction implies
(a) Decrease in density.
(b) Decrease in mass.
(c) Decrease in ionic radii.
(d) Decrease in radioactivity.
Answer:
(c) Decrease in ionic radii.

Question 6.
Which of the following species are paramagnetic?
(a) Fe²⁺
(b) Zn
(c) Hg²⁺
(d) Ti⁴⁺
Answer:
(a) Fe²⁺

Question 7.
The approximate percentage of iron in misch metal is____
Answer:
5

Question 8.
The maximum oxidation state shown by Mn in its compounds is _____
Answer:
+ 7

Question 9.
The acidic, basic or amphoteric nature of Mn₂O₇, V₂O₅ and CrO are respectively
Answer:
acidic, amphoteric and basic

Question 10.
The correct order of oxidising power of the following is
(a) Cr₂O₇^2- > MnO₄^– > VO₂⁺
(b) MnO₄^– > Cr₂O₇^2- > VO₂⁺
(c) VO₂⁺ >MnO₄^– > Cr₂O₇^2-
(d) MnO₄^– > VO₂⁺ > Cr₂O₇^2-
(e) Cr₂O₇^2- > VO₂⁺ > MnO₄^–
Answer:
(b) MnO₄^– > Cr₂O₇^2- > VO₂⁺

Plus Two Chemistry The d and f Block Elements Two Mark Questions and Answers

Question 1.
Transition metals can form complexes.

1. Is the statement true?
2. Justify.
3. Give two examples of complexes.

Answer:

1. Yes
2. Transition elements form complex compounds due to the comparatively smaller size of the metal ion, their high ionic charges and the availability of d-orbital for the bond formation.
3. [Fe(CN)₆]^3-, [Cr(NH₃)₆]³⁺

Question 2.
Consider the statement: Scandium is a transition element but zinc is not.

1. Do you agree with his statement?
2. Justify your answer.

Answer:
1. Yes.

2. Scandium has incompletely filled 3d orbitals in its ground state (3d⁰), it is regarded as a transition element. On the other hand, zinc atom has completely filled d orbitals (3d¹⁰) in its ground state as well as in its oxidised state. Hence it is not regarded as a transition element.

Question 3.
Transition elements show a variable oxidation state.

1. Give reason.
2. Illustrate with an example.

Answer:

1. The variable oxidation states of transition elements is due to the participation of ns and (n-1) d electrons in bonding,
2. E.g.: The outer configuration of Mn is 3d⁵,4s² it exhibits all the oxidation states from +2 to +7.

Question 4.
Cu+ is colourless while Cu²⁺ is coloured in aqueous solution.

1. Is it true?
2. What are the reasons for this?

Answer:

1. Yes.
2. In Cu+ it is 3d¹⁰,4s⁰ and there is no d-d transition. Hence no colour. But in Cu²⁺ it is 3d⁹, 4s⁰ it has d-d transition and hence it has colour.

Question 5.
The highest oxidation state of a metal is exhibited in its oxide or fluoride only.

1. Do you agree?
2. If yes, give reason.

Answer:

1. Yes.
2. Due to very high electronegativity and small size oxygen and fluorine can oxidise the metal to its highest oxidation state.

Question 6.
What is mischmetal? Give its use.
Answer:
‘Misch metal’ is an alloy which consists of a lanthanoid metal (~ 95%) and iron (~ 5%) and traces of S, C, Ca and Al. It is used in Mg-based alloy to produce bullets, shell and lighter flint.

Question 7.
Some ions of transition metals are given below. Categorize them into those which are coloured or not. Justify your answer.
Ti³⁺, V²⁺, Sc³⁺, Mn²⁺, Ti⁴⁺, Cu²⁺, Zn²⁺, Cu⁺
Answer:

• In Ti³⁺, V²⁺, Mn²⁺, Ca²⁺ d-d transition is possible. Hence they have colour.
• In Sc³⁺ and Ti⁴⁺(3d⁰), Zn²⁺ and Cu⁺(3d¹⁰) d-d transition is not possible.

Question 8.
Why are Mn²⁺ compounds more stable than Fe²⁺ toward oxidation to their +3 state?
Answer:
The electronic configuration of Mn²⁺ is 3d⁵ , which is stable due to half-filled sub-shell. Hence, Mn²⁺ is not easily oxidised to Mn³⁺. On the other hand, Fe²⁺ has electronic configuration 3d⁶ . After losing one electron it changes to Fe³⁺ which has stable 3d⁵ electronic configuration. Hence, Fe²⁺ is relatively easily oxidised to Fe³⁺

Question 9.
Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
Answer:
Except Sc, the most common oxidation state of the first row transition elements is +2 which arises from the loss of two 4s electrons. The +2 state becomes more and more stable in the first half of first transition elements with increasing atomic number because 3d orbitals acquires only one electron in each of the five 3d orbitals.

Question 10.
In what way is the electronic configuration of the transition elements different from that of the nontransition elements?
Answer:
Transition elements have partially filled d-dubshell belonging to penultimate energy level whereas non-transition elements do not have any partially filled d-subshell. In non-transition elements, the last electron enters the s or p-subshell whereas in transition elements the last electron enters the d-subshell of penultimate energy level.

Question 11.
Predict which of the following will be coloured aqueous solution?
Ti³⁺ , V³⁺ cu⁺, Sc³⁺ , Mn²⁺, Fe³⁺ and CO²⁺ and MnO₄^–. Give reasons for each.
Answer:
Any ion that has partially filled d-orbitals is coloured due to d-d transition in visible light. MnO₄^– has purpule colour due to charge-transfer. Cu⁺ (d¹⁰ ) and Sc³⁺ (d⁰) are white since there is no d-d transition.

Question 12.
Use Hund’s rule to derive the electronic configuration of Ce³⁺ ion and calculate its magnetic moment on the basis of ‘spin-only’ formula.
Answer:
Ce (Z = 58) = ₅₄[Xe]4f¹5d¹6s²
Ce³⁺ = ₅₄[Xe]4f¹
It has one unpaired electron.
µ = \(\sqrt{n(n+2)}\) B.M.
µ = \(\sqrt{1(1+2)}=\sqrt{3}\) B.M = 1.732 B.M.

Question 13.
Among the following transition metal compounds which are coloured. Why?
TiO, TiO₂, ZnSO₄, MnCl₂, CrCl₃
Answer:

• TiO → Coloured
• MnCl₂ → Coloured
• CrCl₃ → Coloured

Question 14.
In the series Sc (Z = 21) to Zn (Z = 30), the enthalpy of atomisation of zinc is the lowest. Why?
Answer:
Zinc has weaker interparticle forces due to fully filled d-subshell (3d¹⁰).

Question 15.
Fill in the blanks:

Answer:
i. 5

ii. 4.90 BM

Plus Two Chemistry The d and f Block Elements Three Mark Questions and Answers

Question 1.
Explain why

1. Transition metals have higher density than alkaline earth metals?
2. Transition metals are less electropositive than alkaline earth metals?
3. Transition elements exhibit higher enthalpies of atomisation?

Answer:
1. Transition metals have smaller atomic size and stronger interparticle attractive forces (metallic bond) than alkaline earth metals and hence have higher density than alkaline earth metals.

2. Transition metals due to their smaller atomic size and greater effective nuclear charge, have higher ionisation energy than alkaline earth metals and hence are less electropositive.

3. Transition elements have very strong interatomic bonds due to their small size and also due to the presence of large number of unpaired electrons in their atoms. As a result, they have very high enthalpies of atomisation.

Question 2.
Two students wrote the electronic configuration of Chromium (Z = 24) as shown below:
Student A: [Ar] 4s², 3d⁴
Student B : [Ar] 4s¹ 3d⁵

1. Pick out the correct electronic configuration and justify.
2. Calculate the spin only magnetic moments of Sc³⁺, Mn²⁺, Fe³⁺ and find out which is more paramagnetic.

Answer:
1. [Ar] 3d⁵4s¹ . Due to the extra stability of the half-filled 3d level.

2. Sc³⁺ – n = 0 µ = 0 BM
Mn²⁺ – n = 5 µ = \(\sqrt{5(5+2)}=\sqrt{35}\) = 5.92 BM
Fe³⁺ – n = 5 µ = \(\sqrt{5(5+2)}=\sqrt{35}\) = 5.92 BM

Plus Two Chemistry The d and f Block Elements Four Mark Questions and Answers

Question 1.
Some information regarding a particular compound is given below.
A deep purple black crystal which is moderately soluble in water at room temperature and it is prepared from pyrolusite.

1. Identify the compound.
2. Give the chemical reactions involved in the preparation of this compound.
3. Upon heating to 746 K, what happens to this compound? Give the equation.

Answer:

1. KMnO₄
2. 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O 3MnO₄^2- + 4H⁺→ 2MnO₄^– + MnO₂ + 2H₂O
3. Potassium permanganate on strong heating gives potassium manganate, manganese dioxide and oxygen.
   2KMnO₄→ K₂MnO₄ + MnO₂ + O₂

Question 2.
Consider the statement: All transition elements form coloured compounds.

1. Do you agree?
2. Name three transition elements which cannot form coloured compounds.
3. What is the reason for colour of transition metal compounds?

Answer:

1. No.
2. Zn, Cd and Hg.
3. The colour of transition compound is due to d-d transition. The colour observed corresponds to the complementary colour of the light absorbed.

Question 3.
Complete the table:

Answer:

Question 4.
The size of the atoms from Lanthanum to Lutetium, shows a steady and slow decrease in atomic size.

1. Do you agree with it?
2. What are the causes for this?
3. What are the consequences of this phenomenon?

Answer:
1. Yes.

2. It is due to Lanthanoid contraction. In Lanthanoid series the 4f electrons are being added in the antipenultimate shell. The 4f electrons have very poor shielding effect because of diffused shape of 4f orbitals and the effective nuclear charge experienced by each 4f electrons increases. Hence there is a regular decrease in radii with increase in atomic number.

3. Consequences of lanthanoid contraction are:

• Difficulty in separation of lanthanoids due to similarity in chemical properties.
• Similarity in size of elements belonging to same group of second & third transition series.

Question 5.
Zn, Cd, Hg are pseudo transition elements.

1. What do you mean by pseudo transition elements?
2. Write the outer electronic configuration of transition elements.
3. Write any four properties of transition elements,

Answer:
1. Pseudo transition elements have completely filled d orbitals and will not exhibit the characteristic properties of true transition elements.

2. The outer electronic configuration of transition elements is (n-1) d^{1 – 10} ns^{1 – 2}.

3. Four properties of transition elements.

• They form coloured compounds.
• They exhibit variable oxidation state.
• They form complex.
• They are good catalysts.

Question 6.
In a demonstration experiment, the teacher prepared the following solutions.
Solution 1: ZnSO₄ in water
Solution 2: CuSO₄ in water

1. Which of the above solutions is coloured?
2. Explain the Chemistry behind it.

Answer:
1. Solution 2: CuSO₄ in water is coloured.

2. In CuSO₄, Cu is in +2 oxidation state. Cu²⁺ has 3d⁹ electronic configuration and it can undergo d-d transition and hence has colour(blue). In ZnSO₄, zinc is in +2 oxidation state. Zn²⁺ has the 3d¹⁰ configuration. It has no d-d transition and hence it is colourless.

Question 7.

1. What is the effect of heat on KMnO₄
2. Give any two examples to show the oxidising property of KMnO₄.

Answer:
1. On heating, KMnO₄ decomposes at 513 K into potassium manganate and oxygen gas is evolved.

2. Two examples to show the oxidising property of KMnO₄

• In acid medium it oxidises iodide to iodine.
  10I^– + 2MnO₄^– + 16H⁺ → 2Mn²⁺ + 8H₂O + 5I₂
• In neutral or faintly alkaline solutions it oxidises iodide to iodate.
  2MnO₄^– + H₂O + I^– → 2MnO₂ + 2OH^– + IO₃^–

Question 8.
(a) Hf and Zr have similar ionic radii though they belongs to the 3^rd and 4^th transition series. Explain the reason for the anomalous behaviour.
(b) MnO₄^– & MnO₄^2- are the ions of manganese. They differ in colour and magnetic nature.

1. How do this difference occured?
2. Support your answer with their structure.

Answer:
(a) This is a consequence of lanthanide contraction.

(b) Differ in colour and magnetic nature.
1. This is due to difference in number of electrons in d- subshell.
2.

Question 9.
Pyrolusite on heating with KOH in the presence of air gives a dark green compound (A). The solution of (A) on treatment with H₂SO₄ gives a purple coloured compound (B).
a) Identify ‘A’ and ‘B’ and write the balanced chemical equation.
b) Write two reactions to show the oxidising nature of ‘B’.
Answer:

Question 10.
Give the method of preparation and two examples for the oxidizing property of K₂Cr₂O₇.
OR
Some d-block elements are given below:
Cr, Mn, Fe, Co, Ni
Identify the element which shows maximum paramagnetic behaviour.
Answer:
K₂ Cr₂ O₇ is prepared from chromate ore Fe Cr₂ O₄.
Step I: The powdered ore is heated with molten alkali to form soluble sodium chromate.

4 Fe Cr₂ O₄ + 16 NaOH + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8H₂O

Step II: Sodium chromate (Na₂CrO₄) is filtered and acidified with dil.H₂SO₄ to form sodium dichromate.

2Na₂CrO₄ + H₂SO₄ → Na₂Cr₂O₇ + Na₂SO₄ + H₂O

Step III: Na₂Cr₂O₇ solution is treated with KCI to form

K₂ Cr₂ O₇.
Na₂Cr₂O₇ + 2 KCI —» K₂ Cr₂ O₇ + 2NaCI

OR

Magnetic moment, µ = \(\sqrt{n(n+2)}\) BM
Cr; n=6 µ = \(\sqrt{48}\) = 6.93 BM
Mn; n=5 µ = \(\sqrt{35}\) = 5.92 BM
Fe; n=4 µ = \(\sqrt{24}\) = 4.90 BM
Co; n=3 µ = \(\sqrt{15}\) = 3.87BM
Ni; n=2 µ = \(\sqrt{8}\) = 2.83 BM
∴ Cr has maximum paramagnetic behaviour.

Question 11.

1. Even though usually transition elements exhibit +2 oxidation states, it changes from 0 to +8 in different compounds. What is the reason for it?
2. In the first transition series the atomic radius is decreasing from Sc to Cr and remains constant from Cr to Cu. From Cu to Zn it increases. Why?
3. The atomic radii of second and third transition series are same. Why?

Answer:
1. The variable valency is due to the following reason. The energy difference between inner ‘d’ level and outers level is so small. Therefore electrons from ‘d’ level as well as ‘s’ level can take part in reaction.

2. Sc to Cr – Atomic radius decreases due to increase in nuclear charge. Cr to Cu – Due to a balance between the increased nuclear charge and increased screening effect atomic radii become almost constant.

Cu to Zn – Repulsive interactions between the paired electrons in d-orbitals become very dominant towards the end of the period and cause the expansion of electron cloud and thus result in increased atomic size.

3. Lanthanoid, Contraction.

Question 12.
a) Calculate the magnetic moments of the following ions and predict its magnetic property.
Ti³⁺ (Z = 22)
Ni²⁺ (Z = 25)
Fe³⁺ (Z = 26)
Zn²⁺ (Z = 30)
Answer:

Question 13.
TiO, TiO₂, ZnSO₄, MnCl₂, CrCl₃
Arrange the above metal ions in the increasing order of their magnetic moment. (3)
Answer:

The increasing order of magnetic moment is TiO₂ = ZnSO₄ < TiO < CrCl₃, MnCl₂

Question 14.
How magnetic moment is calculated? How will you identify magnetism of an element from its electronic configuration?
Answer:
By using the ‘spin-only’ formula, n = \(\sqrt{n(n+2)}\) BM where ‘n’ is the number of unpaired electrons and ‘µ’ is the magnetic moment in Bohr Magneton (BM). If the element contains an unpaired electron it is paramagnetic. If all the electrons are paired and

Plus Two Chemistry The d and f Block Elements NCERT Questions and Answers

Question 1.
Why are Mn²⁺ compounds more stable than Fe²⁺ toward oxidation to their +3 state?
Answer:
The electronic configuration of Mn²⁺ is 3d⁵, which is stable due to half-filled sub-shell. Hence, Mn²⁺ is not easily oxidised to Mn³⁺. On the other hand, Fe²⁺ has electronic configuration 3d⁶. After losing one electron it changes to Fe³⁺ which has stable 3d⁵ electronic configuration. Hence, Fe²⁺ is relatively easily oxidised to Fe³⁺

Question 2.
Explain briefly how +2 state becomes more and more stable in the first half of the first row transition elements with increasing atomic number?
Answer:
Except Sc, the most common oxidation state of the first row transition elements is +2 which arises from the loss of two 4s electrons. The +2 state becomes more and more stable in the first half of first row transition elements with increasing atomic number because 3d orbitals acquire only one electron in each of the five 3d orbitals (i.e., each d-orbital remains half-filled) and inter electronic repulsion is the least and nuclear charge increases.

In second half of first row transition elements, electron starts pairing up in 3d orbitals and hence there is inter electronic repulsion. (Ti²⁺ to Mn²⁺ electronic configuration changes from 3d² to 3d⁵ but in second half i.e., Fe²⁺ to Zn²⁺ it changes from 3d⁶ to 3d¹⁰.)

Question 3.
In what way is the electronic configuration of the transition elements different from that of the non-transition elements?
Answer:
Transition elements have partially filled d-subshell belonging to penultimate energy level whereas non-transition elements do not have any partially filled d- subshell. In non-transition elements, the last electron enters the s or p-subshell whereas in transition elements the last electron enters the d-subshell of penultimate energy level.

Question 4.
Predict which of the following will be coloured in aqueous solution?
Ti³⁺, V³⁺, Cu⁺, Sc³⁺, Mn²⁺, Fe³⁺ and CO²⁺ and MnO^4-. Give reasons for each.
Answer:
Any ion that has partially filled d-orbitals is coloured due to d-d transition in visible light. Ti³⁺ (d¹), V³⁺ (d²) Mn²⁺ (d⁵), Co²⁺ (d⁸) are coloured. MnO^4- has purpule colour due to charge-transfer. Cu⁺ (d¹⁰) and Sc³⁺ (d⁰) are white since there is no d-d transition.

Question 5.
Use Hund’s rule to derive the electronic configuration of Ce³⁺ ion and calculate its magnetic moment on the basis of ‘spin-only’ formula.
Answer:
Ce (Z = 58) = ₅₄[Xe]4f¹5d¹6s²
Ce³⁺ = ₅₄[Xe]4f¹
It has one unpaired electron.
µ = \(\sqrt{n(n+2)}\) B.M.
where n = number of unpaired electrons.
∴ Magnetic moment of Ce³⁺,
μ = \(\sqrt{1(1+2)}\) = \(\sqrt{3}\) BM
= 1.732 BM

We hope the given Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements will help you. If you have any query regarding Plus Two Chemistry Chapter Wise Questions and Answers Chapter 8 The d and f Block Elements, drop a comment below and we will get back to you at the earliest.