Marine Workshop Practical And Afloat Training is a dynamic subject that continuously shifts from one perspective to another. However, the technicality is the same even if the theories and perspectives vary. Hence to gain knowledge in this subject you must be equipped with more vicious on the syllabus.
In this article, we tried to provide the required syllabus of the MV3811 Marine Workshop Practical And Afloat Training subject to gain command of the subject matter. By the end of the course, you will be trained and guided with useful knowledge regarding technical english, which plays a major role in understanding the core of this B.E Marine Engineering semester VII related to Affiliated institutions awarded by Anna University course. Hope this information is useful. Kindly share it with your friends. Comment below if you have queries regarding the syllabus.
If you want to know more about the syllabus of B.E. Marine Engineering connected to an affiliated institution’s four-year undergraduate degree program. We provide you with a detailed Year-wise, semester-wise, and Subject-wise syllabus in the following link B.E. Marine Engineering Syllabus Regulation 2021 Anna University.
MV3811 – Marine Workshop Practical And Afloat Training Syllabus
Aim Of Concept:
- To impart knowledge, skill and to train the students to be able to perform as Engineer officer on board ships.
The students are required to undergo Marine Workshop Training in DG Shipping approved Marine Engineering Workshop for a duration of 6 months. The training should be as per the Merchant Shipping (Standard of Training Certification and Watch keeping for Seafarers) Rule 1998.
- Competency on – use of hand tools used for marine equipment’s for dismantling, maintenance, repair and reassembly of shipboard equipment’s. 100 hrs.
- Competency on – use of hand tools used for electrical and electronic equipment’s, measuring and test equipment’s for locating and repairing faults and malfunctions. 100 hrs.
- Competency on – Operation of Main and Auxiliary machinery and associated control systems. 30 hrs.
- Competency on – Operating pumping systems & associated control systems. 90 hrs.
- Competency on – Operating alternators, generators & control systems. 100 hrs.
- Competency on – Maintaining alternators, generators and Control systems. 20 hrs.
- Competency on – Maintaining Marine Engineering system including control systems (overhauling and maintenance of Marine Diesel Engines, air compressors, heat exchangers, oil separators etc.,) 700 hrs.
- Competency on – Controlling and fighting fire onboard. 6 hrs.
- Competency on – Operation of life saving appliances. 6 hrs.
Total hrs. of Training: 1152 hrs.
The competency of the students are evaluated by the Marine Engineering Workshop and a report is sent to the college. During the training the students have to maintain a work dairy. After completion of this training the students will be examined as follows:
a) Assessment on work diary (Internal) 200 Marks.
b)
(i) Written test for 1 hour. 10 questions 10 x 10 = 100 Marks
(ii) Viva voce 200 Marks
Total 500 Marks
* Valuation by both Internal and External Examiners.
References:
- Original Equipment Manufacturers Manuals for On Board Equipments
- Benedict, “Nontraditional Manufacturing Processes”, 1 st Ed. taylor & Francis, Indian reprint 2011 (Yesdee Publishings Pvt. Ltd.)
- Bloch, “Machinery Component Maintenance and Repair”,3rd Ed. Elsevier, Indian Reprint 2010, (Yesdee Publishings Pvt. Ltd.)
- Youssef, “Machining Technology”, 1st Vol., Taylor & Francis, Indian Reprint 2012 (Yesdee Publishings Pvt. Ltd.)
- Paulin.D.S, Fowler.D.J., “Steering Gear” Marine Engineering Practice, Vol 1, Part 09, IMarEST, London, Reprint 1997
- Wright.A.A, “ Exhaust Emission From Combustion Machinery”, Marine Engineering Practice, Vol 3, Part 20, IMarEST, London, 2000
- Leigh Jones, Chris., “A Practical Guide to Marine Fuel Oil Handling,” Marine Engineering Practice, Vol 3, Part 19, IMarEST, London, 2008
- Henshall. S.H, “Marine Medium Speed Diesel Engines,” Marine Engineering Practice, Vol 1, Part 03, IMarEST, London, Reprint 1998
- Norris.A, “Prime Movers for Generation of Electricity(A) Steam Turbines”, Marine Engineering Practice, Vol 1, Part 02, IMarEST, London, Reprint 1998
- Sterling.L, “Selection Installation & Maintenance of Marine Compressors”, Marine Engineering Practice, Vol 1, Part 01, IMarEST, London, Reprint 1996
- Gopalakrishnan & Banerji, “Maintenance and Spare Parts Management”, PHI Learning Pvt. Ltd., 2010
- Mishra and Pathak, “Maintenance Engineering and Management,” 2nd Ed., PHI Learning Pvt. Ltd., 2012
- Venkataraman, “Maintenance Engineering and Management,” 1 st Ed., PHI Learning Pvt. Ltd., 2010
- Alan Rowen, Raymond Gardner, Jose Femenia, David Chapman, and Edwin Wiggins, “Introduction to Practical Marine Engineering”,1 st Ed.,SNAME, 2005
- Roy L. Harrington, “Marine Engineering”, 1 st. Ed., SNAME, 1992
- GTH. Flanagan, “Marine Boilers” 3rd Edition, Butter worth, London, 2001.
- K.M.B. Donald, “Marine Steam Turbines”, 1st Edition, Institute of Marine Engineers, London, 1977.
- L.Jackson & T.D. Morton, “General Engineering Knowledge for Marine Engineers”, 4th Edition, Thomas Reeds Publication, United Kingdom, 1986.
- Norris.A, “Operation of Machinery in Ships Steam Turbines, Boilers”, Marine Engineering Practice, Vol 2, Part 15, IMarEST, London, Reprint 2000
- Edmund G.R, Kraallavers , “Advanced Electo-technology For Marine Engineers”, 2nd Ed. Reeds Vol 07, Adlard Coles Nautical, London, 1999
- W.Laws, “Electricity Applied To Marine Engineering”, 4th edition, The Institute Of Marine Engineers, London, 1998.
Must Read For More: