A Plus Topper

Improve your Grades

MF3513 - Metrology and Computer-Aided Inspection Laboratory Syllabus Regulation 2021 Anna University

by

This article code MF3513 explains the subject syllabus of Anna University B.E Manufacturing Engineering fifth semester. We aim to provide the metrology and computer-aided inspection laboratory syllabus based on regulation 2021.

We intend to give helpful information regarding the syllabus Of Anna University B.E Manufacturing Engineering students. Subject code MF3513 –  Metrology and Computer-Aided Inspection Laboratory syllabus assists the students in getting unit-wise info without leaving a topic from the syllabus. We included the required textbooks and references. The following image we added in this article will help you just by reading you will be able to get the whole syllabus of this subject. Hope you find this information useful. Never forget to share with your friends if you like this information. Comment below if you have any doubts regarding the syllabus of the subject.

If you want to know more about the syllabus of B.E. Manufacturing Engineering connected to an affiliated institution’s four-year undergraduate degree program. We provide you with a detailed Year-wise, semester-wise, and Subject-wise syllabus in the following link B.E. Manufacturing Engineering Syllabus Anna University Regulation 2021.

Aim Of Objectives:

  • To practice various measurement methods.
  • To get acquainted with the instruments used for linear and angular measurements.
  • To learn about the form measurements.
  • To familiarize with surface texture measurements.
  • To get acquainted with the advanced instruments such as machine vision system and CMM.

List Of Experiments:

Contact methods:

  1. Linear and Angular measurement using Autocollimator.
  2. Measurement of composite error using gear tester.
  3. Calibration of optical comparator and measurement of dimension
  4. Determining the accuracy of electrical and optical comparator.
  5. Measurement of taper angle using sine bar.
  6. Measurement of various angles using Bevel Protractor.
  7. Surface assessment using contact roughness tester.

Non-contact measurement techniques:

  1. Measurement of Taper angle using Tool Makers Microscope.
  2. Measurement of various elements of screw thread using Tools Makers Microscope.
  3. Experiments in CMM.

Related Posts On Semester – V:

Must Read: