Regulation 2021 Anna University Code – ME3681 deals with the semester – VI CAD/CAM Laboratory Syllabus of B.E Mechanical Engineering. Most of the semester syllabus tries to give both practical and theoretical knowledge to the students. To acquire the proper knowledge regarding the studies to prepare for the examination, need a detailed syllabus right?
This article will assist you in gaining most of the syllabus details. We tried our best to provide the required syllabus info. Chapter-wise syllabus along with reference books written by experts and textbooks added. Hence in this article ME3681 – CAD/CAM Laboratory syllabus, we include all the details regarding the examination. Students can easily get all the data regarding the syllabus on one page. Hope you will understand the syllabus. And All the best for your exams. Don’t forget to share it with your friends.
If you want to know more about the syllabus of B.E Mechanical Engineering connected to an affiliated institution’s four-year undergraduate degree program. We provide you with a detailed Year-wise, semester-wise, and Subject-wise syllabus in the following link B.E Mechanical Engineering Syllabus Anna University Regulation 2021.
Aim Of Objectives:
- To gain practical experience in handling 2D drafting and 3D modeling software systems.
- Designing 3-dimensional geometric models of parts, sub-assemblies, and assemblies and exporting it to drawing.
- Programming G & M Code programming and simulate the CNC program and Generating part programming data through CAM software.
3D Geometric Modelling:
- CAD Introduction
Sketch:
Solid modeling: Extrude, Revolve, Sweep, Variational sweep and Loft.
Surface modeling: Extrude, Sweep, Trim, Mesh of curves and Free form.
Feature manipulation: Copy, Edit, Pattern, Suppress, History operations.
Assembly: Constraints, Exploded Views, Interference check
Drafting: Layouts, Standard & Sectional Views, Detailing & Plotting - Creation of a 3D assembly model of following machine elements using 3D Modelling software
1. Flange Coupling
2. Plummer Block
3. Screw Jack
4. Lathe Tailstock
5. Universal Joint
6. Machine Vice
7. Stuffing box
8. Crosshead
9. Safety Valves
10. Non-return valves
11. Connecting rod
12. Piston
13. Crankshaft
Students may also be trained in manual drawing of some of the above components (specify the number – progressive arrangement of 3D).
Manual Part Programming:
- CNC Machining Centre
(i) Linear Cutting.
(ii) Circular cutting.
(iii) Cutter Radius Compensation.
(iv) Canned Cycle Operations. - CNC Turning Centre
(i) Straight, Taper, and Radial Turning.
(ii) Thread Cutting.
(iii) Rough and Finish Turning Cycle.
(iv) Drilling and Tapping Cycle. - Computer-Aided Part Programming
(i) Generate CL Data and post-process data using CAM packages for Machining and Turning Centre.
(ii) Application of CAPP in Machining and Turning.
Related Posts On Semester – VI: