BM3402 – Analog and Digital Integrated Circuits Syllabus Regulation 2021 Anna University

In this article, we are going to discuss the B.E. Biomedical Engineering, semester IV, Anna University connected to the regulation 2021 subject syllabus. Let’s see what’s more…

We tried our best to provide the following unit-wise BM3402 – Analog and Digital Integrated Circuits detailed Syllabus. We sum up the appropriate textbooks and references to this page. If you have any doubts regarding the syllabus, you can simply comment below on the following page. Hope this information is useful. Share it with your classmates. Thanks for landing on this page.

If you want to know more about the B.E. Biomedical Engineering Syllabus connected to an affiliated institution’s four-year undergraduate degree program. We provide you with a detailed Year-wise, semester-wise, and Subject-wise syllabus in the following link B.E. Biomedical Engineering Syllabus Regulation 2021 Anna University.

Aim of Concept

  • To study the circuit configuration and introduce practical applications of linear integrated circuits.
  • To introduce the concept of application of ADC and DAC in real time systems and Phase Locked Loop with applications.
  • To introduce the design of various combinational digital circuits using logic gates
  • To bring out the analysis and design procedures for synchronous and asynchronous sequential circuits

BM3402 – Analog and Digital Integrated Circuits Syllabus

Unit I: Introduction To Operational Amplifier And Its Applications

Operational amplifier –ideal characteristics, Performance Parameters, Linear and Nonlinear Circuits and their analysis- voltage follower, Inverting amplifier, Non-inverting Amplifiers, Differentiator, Integrator, Voltage to Current converter, Instrumentation amplifier, Low pass, High pass filter and band pass filters, Comparator, Multivibrator and Schmitt trigger, Triangular wave generator.

Unit II: Digital To Analog And Analog To Digital Converters And PLL

Analog switches, High speed sample and hold circuit and IC‘s, Types of D/A converter -Weighted resistor, R-2R ladder DAC, D/A Accuracy and Resolution. A/D converter – Flash, Dual slope, Successive approximation, A/D Accuracy and Resolution. Voltage controlled oscillator, Voltage to Frequency converters. PLL-Closed loop analysis of PLL, Frequency multiplication/ division, FSK demodulator.

Unit III: The Basic Gates And combinational Logic Circuits

Number Systems – Decimal, Binary, Octal, Hexadecimal, 1‘s and 2‘s complements, Codes – Binary, BCD, 84-2-1, 2421, Excess 3, Biquinary, Gray, Alphanumeric codes, Boolean theorems, Logic gates, Universal gates, Sum of products and product of sums, Minterms and Maxterms, Karnaugh map and Tabulation methods. Logic families- TTL, MOS, CMOS, BiCMOS – Comparison of Logic families.

Unit IV: Combinational Logic Circuits

Problem formulation and design of combinational circuits – Code-Converters, Half and Full Adders, Binary Parallel Adder – Carry look ahead Adder, BCD Adder, Magnitude Comparator, Decoder, Encoder, Priority Encoder, Mux/Demux.

BM3402 – Analog and Digital Integrated Circuits Syllabus Regulation 2021 Anna University

Unit V: Sequential Logic Circuits

Flip flops – SR, JK, T, D, Master/Slave FF, Triggering of FF, Analysis and design of clocked sequential circuits – state minimization, state assignment, circuit implementation. Counters, Ripple Counters, Ring Counters. Types of Registers, Serial In – Serial Out, Serial In – Parallel out, Parallel In -Serial Out, Parallel In – Parallel Out, Universal Shift Register.

Text Books:

  1. Sergio Franco, “Design with operational amplifiers and analog integrated circuits”, Mc Graw Hill Education, 3rd Edition, 2017
  2. John.F.Wakerly, “Digital design principles and practices”, Pearson Education, 5th Edition, 2018

References:

  1. Taub and Schilling, “Digital Integrated Electronics”, Mc Graw Hill, 2017.
  2. Charles H. Roth, Jr, “Fundamentals of Logic Design”, Jaico Books, 7th Edition, 2013.
  3. M. Morris Mano and Michael D.Ciletti, “Digital Design”, Pearson, 5th Edition, 2013.
  4. S Salivahanan and V S Kanchana Bhaaskaran, Linear Integrated Circuits, McGraw Hill Education, 3rd Edition, 2018

Related Posts On Semester – IV:

Must Read: